Beschreibung
Becker Roller Shutter Motor R30-17-E25 30Nm NHK
2030 140 010 0
- Becker roller shutter motor
- Recommended application: Roller shutters and roller doors
- Without radio control
- With manual override (crank handle connection)
- Electronic limit switch-off
- Suitable for roller tubes from Ø 50mm
- Obstacle detection: Switches off in the event of obstructions (e.g. freezing) and increased torque
- Intelligent installation management allows for quick limit position adjustments during installation
- Limit position setting: Automatic detection with existing end stops
- Automatic fabric length compensation: Stretching of the shutter is automatically detected and corrected by the drive
- Limit position status indicator: The drive indicates the absence of a limit position via a brief interruption of travel
- Parallel switching possible
- Image similar (delivery does not include adapter, drive wheel, or mount)
- Installation only with rigid shaft connectors
- Motor protected against overheating
- Suitable for right and left-hand installation
- Nominal torque: 30Nm
- Nominal speed: 17 rpm
- Nominal voltage: 230 V
- Frequency: 50Hz
- Power consumption: 210W
- Current consumption: 0.9A
- Outer diameter: 45 mm
- Protection class IP44
- Frequency 50Hz
- Weight: 2.80 kg
- Connection cable: 0.5m length – rubber – H05RR-F4G0.75 – in black
- Total length: 744 mm
- Made in Germany
Scope of delivery: 1 motor with connection cable
