Beschreibung
Becker Roller Shutter Motor P5-16-E01
2009 120 110 0
- Tubular motor
- Without radio control
- With blockage and obstacle detection
- Automatic limit switch detection
- VDE certification
- Quiet, smooth operation
- Automatic curtain length compensation
- Can be connected in parallel without an isolation relay
- Plug-in connection cable
- Overload protection
- This tubular motor is exclusively intended for use in roller shutter and roller door applications
- To ensure a long service life, only rustproof, weather-resistant, and moisture-resistant materials are used
- Low stress on the curtain and stop due to constant optimization of stop forces
- Multiple motors can be connected in parallel and operated via a controller or switch thanks to an integrated isolation relay. The number of connectable motors depends on the load capacity of the interface and the fuse.
- The connection cable is connected to the motor via a plug-in connection, is interchangeable, and is available in various versions and lengths
- In the event of high heat development (e.g., due to continuous operation), a thermal circuit breaker interrupts the power supply to the motor. Operation is possible again after cooling down
- Limit position setting possible via switch on the drive head without a special adjustment setspace permitting
- Nominal torque: 5Nm
- Nominal speed: 16 rpm
- Nominal voltage: 230 V
- Frequency: 50Hz
- Power consumption: 80W
- Current consumption: 0.35A
- Outer diameter: 35mm
- Protection class IP44
- Frequency 50Hz
- Total length: 457mm
Scope of delivery: 1 motor with connection cable
